Terra Products

The cs432 converts up to 32 transponders according to DVB-S and DVB-S2 standards.Module has one output and output signal loop through

Suitable for operation in parellel connection for back-up function implementaion

Modular power supply with integrated RF combiner

DIN rail power supply

Switch mode power supply

The sdi-410C IPTV DVB-S/S2 to IP streamer allows for the selection of satellite channels and their distribution via Ethernet (LAN) network based on twisted-pair cabling. The output IP stream is usually provided to IPTV receivers via network switches. The use of multicast technique considerably saves the network resources

TThe sti-410C IPTV DVB-T/T2/C to IP streamer allows for the selection of terrestrial (DVB-T/T2) or cable TV (DVB-C) multiplex and its distribution via Ethernet (LAN) network based on twisted-pair cabling. The output IP stream is usually provided to IPTV receivers via network switches. The use of multicast technique considerably saves the network resources.

IP to DVB-T modulator, MPTS or SPTS up to 200Mbps input, 4 adjacent channels output,

IP to DVB-C modulator, MPTS or SPTS up to 200Mbps input, 4 adjacent channels output

Twin DVB-S/S2 to DVB-T transmodulator, 2x CI interfaces, DIN rail or wall mounting

Twin DVB-S/S2 to DVB-T transmodulator, DIN rail or wall mounting

Twin DVB-T/T2/C to DVB-T transmodulator, 2x CI interfaces, DIN rail or wall mounting

Twin DVB-T/T2/C to DVB-T transmodulator, DIN rail or wall mounting

Twin DVB-S/S2 to DVB-C transmodulator, 2x CI interfaces, DIN rail or wall mounting

Twin DVB-S/S2 to DVB-C transmodulator, DIN rail or wall mounting

DVB-T/T2/C - DVB-C transmodulator, DIN rail or wall mounting

8 DVB-S/S2 transmodulator to 8 DVB-T channels, DIN rail or wall mounting

8 DVB-S/S2 transmodulator to 4 DVB-T channels, DIN rail or wall mounting

8 DVB-S/S2 transmodulator to 8 DVB-C channels, DIN rail or wall mounting

DC distribution cable for 4 modules with width 36 mm.

DC distribution cable for 4 modules with width 48.5 mm

Fmale - Fmale quick coaxial bridge for modules with width 48.5 mm

19" system mountable rack

Fmale - Fmale quick coaxial bridge for modules with width 36 mm

Rail for wall mounting

wideband/quattro LNB IF range,switchable.
configurable with programmer PC102W
DC input for external power supply
passive terrestrial path

active DTT path with AGC,two dSCR outputs

passive DTT path,two dSCR outputs

active DTT path with AGC,four dSCR outputs

active DTT path with AGC,four dSCR outputs

active DTT path with AGC ,six dSCR outputs

active DTT path with AGC ,eight dSCR outputs

Passive DTT path,six dSCR outputs

Passive DTT path,eight dSCR outputs.

quattro LNB IF range : active/bypass DTT path(switchable),eight dSCR outputs

wideband LNB IF range : active DTT path,eight dSCR ouputs

Single cable adaptor/multiswitch for the distribution of SAT IF and DTT signals over one cable to up to 32 recievers

The PC102W - single cable multiswitch programmer is usefull instrument while configuring and trouble shooting SAT IF distribution ssytem built on dSCR multiswitches based on new digital channel stacking components.the application software "dSCRmaster" for windows operating system PCs allows simply change parameters of the multiswitch : operating mod e (static or dynamic).

For combining and amplification signals of SAT IF and terrestrial TV.Built-in power supply for remote DC feeding of dSCR LNB,terrestrial TV preamplifier and other network components.16 positions discrete gain and slope regulator for terrestrial TV.16 positions gain and 4 positions slope reqgulators for SAT IF.SWITCHABLE DiSEqC siganl pass.

For powering dSCR multiswitches.22 kHz, DiSEqC pass.Robust die-cast housing

Line amplifier (47-862 MHz), +10V ÷ +20V, 60mA

Line amplifier (300-2350 MHz), +10V ÷ +20V, 90mA

Power supply +20V, 2A, "F" male.

2 way 2.4 GHz splitter

4 way 2.4 GHz splitter.

frequency range : 5-2400 MHz,DC Pass max. 1A, 30V,Insertion loss : 10 dB +- 1.5 dB

frequency range : 5-2400 MHz,DC Pass max. 1A, 30V,Insertion loss : 20 dB +- 1.5 dB

Link, F plug - F socket

5x8 multiswitch

5x12 multiswitch

5x16 multiswitch

5x24 multiswitch

5x32 multiswitch

5x8 multiswitch,For large installations of SAT IF distribution systems.In line powering through H lines.All components of 5 cable distribution system are compatible to each otherlength of the subscriber line up to 80 meters

5x12 multiswitch,For large installations of SAT IF distribution systems.In line powering through H lines.All components of 5 cable distribution system are compatible to each otherlength of the subscriber line up to 80 meters

5x16 multiswitch,For large installations of SAT IF distribution systems.In line powering through H lines.All components of 5 cable distribution system are compatible to each otherlength of the subscriber line up to 80 meters

5x24 multiswitch,For large installations of SAT IF distribution systems.In line powering through H lines.All components of 5 cable distribution system are compatible to each otherlength of the subscriber line up to 80 meters

5x32 multiswitch,For large installations of SAT IF distribution systems.In line powering through H lines.All components of 5 cable distribution system are compatible to each otherlength of the subscriber line up to 80 meters

 4 way splitter of 4 SAT+1 terrestrial TV signals.DC pass through H trunk lines; switchable DC pass to tap H outputs.Accepts central pin  1.2 mm max.

launch amplifier for amplifying of 4 SAT IF and terrestrial TV signals; built-in switch-mode power supply allows to feed: 18 V DC via H inputs and 14 V DC via V inputs to up lines; switchable 18 V DC via H outputs and switchable 14 V DC via V outputs to down lines; switchable 12 V DC via Terr. TV input

line amplifier for amplifying of 4 SAT IF and terrestrial TV signals; in line powering through H lines,switchable DC pass through H and V lines; switchable 12 V feeding via Terr. TV input; remote powering voltage indication

9x8 multiswitch

9x12 multiswitch

9x16 multiswitch

9x24 multiswitch

9x32 multiswitch

9x8 multiswitch,For large installations of SAT IF distribution systems.Integrated LTE signal suppression filter.In line powering through H lines.Length of the subscriber line up to 80 meters

9x12 multiswitch,For large installations of SAT IF distribution systems.Integrated LTE signal suppression filter.In line powering through H lines.Length of the subscriber line up to 80 meters

9x16 multiswitch,For large installations of SAT IF distribution systems.Integrated LTE signal suppression filter.In line powering through H lines.Length of the subscriber line up to 80 meters

9x24 multiswitch,For large installations of SAT IF distribution systems.Integrated LTE signal suppression filter.In line powering through H lines.Length of the subscriber line up to 80 meters

9x32 multiswitch,For large installations of SAT IF distribution systems.Integrated LTE signal suppression filter.In line powering through H lines.Length of the subscriber line up to 80 meters

 4 way splitter of 8 SAT+1 terrestrial TV signals.Switchable DC pass to tap H outputs.Accepts central pin  1.2 mm max.

Launch amplifier for amplifying of 8 SAT IF and terrestrial TV signals; built-in switch-mode power supply allows to feed: 18 V DC via H inputs and 14 V DC via V inputs to up lines,switchable 18 V DC via H outputs and switchable 14 V DC via V outputs to down lines; switchable 12 V DC via Terr. TV input

line amplifier for amplifying of 8 SAT IF andterrestrial TV signals; in line powering through H lines,switchable DC pass through H and V lines; switchable 12 V feeding via Terr. TV input,Remote powering voltage indication

Metal housing inside and weather-cap

Metal housing inside and weather-cap

For compensation of signal losses in SAT IF distribution networks.Feeding via RF output,DC,tone and terrestrial TV passive bypass.Die-cast housing

For combining of SAT IF and terrestrial TV signals,DC and tone pass through to SAT TV input.

For insertion 14 V/18 V / 0/22 kHz control signal,powered from line or external 18 V power supply.